THE JET BURNER. Price The total height of the venturi with an orifice is 3".     Or by request a 180° 3/8" flare orifice fitting is also available. The total length of the burner with an orifice is 8". Portable Propane Outdoor Jet Burner with Baffle. HPMAX-1 - 1 1/4" Female NPT Cast Iron Venturi Only. ●  We recommend our COM3 Regulator for a High Pressure set up. Produces up to 160,000 BTU/hr in an evenly-directed manner. The CVO250 needle control valve with integral orifice will allow one to fine control the level of the burner flames right at the venturi as opposed to controlling the flame height at the more remote location like at the propane tank regulator or the natural gas source. LPCAST-2L Low Pressure w/ CVO Valve ●  The burner has a 10mm in diameter Center Bolt. ●  In the bottom of the burner head it has three 1 1/4" small legs. Pressure Regulators. Low Pressure Propane or Natural Gas Two-Part Burner. LPCAST-2N Natural Gas w/ G-PILOT Assembly, LPCAST8-2L Low Pressure ●  We recommend a distance of 2" from burner to the bottom of pot. The seafood burner is CSA design certified and this ensures that the even cooking is possible and also boiling is easier for 50 lbs of seafood at once with the jet burner integrated into the unit.     and the venturi to be placed on the outside of the system or away We offer free shipping to 48 U.S. States. A $25.00 charge is applied for custom length reductions (modifications) of stocked pipe burners. HPMAX-1 - 1 1/4" Female NPT Cast Iron Venturi Only. ●  Venturi and Burner head have 1 1/4" Female Normal Pipe Threads. ●  The burner has a 10mm in diameter Center Bolt. LPCAST-2 - Adjustable Length Neck Cast Iron, LPCAST-2 - 6" Diameter Burner Head with Adjustable Length Neck. ● INSECT2 Screen is for the following burners:       "throat" that is required for the gas and air to mix efficiently in order to     each small leg has one 6mm in diameter or a 1/4" mounting bolt. ●  Provides a maximum output of 225,000 BTU/hr. ●  1 1/4" ID Pipe Nipple is NOT included.     supported length of angle iron, it will also help for easy an removal This propane jet burner includes a flame spreader, unlike their competitor’s burners. Pipe nipple must be at least 4". About 3% of these are Cooktops. LPCAST-2N Natural Gas LPCAST-2 with Optional CVO Control Orifice Valve, the pipe nipple can be any length, LPCAST-2 burner head with Optional Pilot Light, Bottom view of LPCAST-2, use anchor bolts as desired, LPCAST-2L Low Pressure     to provide nice even blue flame all across the pipe burner. ●  Provides a maximum output of 40,000 BTU/hr. ●  The G-CVO Needle Control Valve Orifice. HPMAX-2 - Adjustable Length Neck Cast Iron MONSTER, Adjustable Length Neck Cast Iron MONSTER High Pressure, ●  The diameter of the burner head is 6" and the h, ●  We recommend a distance of 5" to 6" from burner to the bottom of pot. LPCAST12-2N Natural Gas w/ CVO Valve The answer is that it depends on whether you are using Natural Gas, High Pressure Propane, or Low Pressure Propane: The ideal distance is 6" using Natural Gas, for all jet burners. LPCAST10-2L Low Pressure w/ CVO Valve Home The burner head has a 10mm in diameter Center Bolt. From the edge of the air inlet to the center bolt the burner is 6 1/4". PBMG125-68-LEGS. PBM-MODIFICATION - Length Modification of a Custom Length Pipe Burner, PBM-MODIFICATION - Length Modification for a Custom Length Pipe Burner.     that is capped off on one end and the venturi goes on the other end, Propane supplied in a trailer home or RV normally has the propane gas already adjusted to a very low pressure at the propane source. Optional Accesories: ●  Also its used for pipe burners which is a black drilled pipe nipple A great addition for those looking to power there tailgating, camping or even the occasional family meet-up. ●  We recommend our natural gas hoses for a natural gas set up. We are an Australian company that values the outdoors and spending time with loved ones over a deliciously cooked meal. 1-piece welded steel frame, wide-set legs for stability. HPB6    LPCAST8-2, LPCAST10, LPCAST10-2, LPCAST12-2 PBMG125-56 LPCAST - 6" Diameter Burner Head with 6" Neck Cast Iron We offer free shipping to 48 U.S. States. ● The screen will  prevent insects from nesting inside the burner. ●  The G-CVO Needle Control Valve Orifice. HPMAX-2 Unit price The default orifice size is #61 and it can be drilled larger for low pressure propane or natural gas. ● For L ow Pressure Propane needs to be piped in a adequate volume. ● Burner has 44 jet nozzles and is designed to produce 440,000 btu/hr. Wt. Optional Accesories: HPB6 w/ CVO Valve ●  The total length of the burner with an orifice is 17". Wt. HPMAX-1 w/ G-PILOT Assembly. ●  The height of the venturi alone is 1 1/2" by the flat top surface is 3". LPCAST8-2N Natural Gas w/ G-PILOT Assembly, LPCAST10 with Optional CVO Needle Valve Orifice, LPCAST10-L Low Pressure Bench tested and adjusted for optimum flame output. Alibaba.com offers 835 jet burner wok products. ●  We recommend our Regulator COM3.    include a 1 1/4" Female NPT venturi and a welded cap on the other end. Fast shipping to California, Oregon, Florida, New York, Pennsylvania, Canada, and Australia every day. $549.99 ●  We recommend our Regulator COM5 for low pressure propane Whereas, if you choose the high-efficiency mode, … 10.25" diameter Has 3/4" female pipe thread. Optional Accesories: CVO250. Select a CVO250 for a Pipe Burner. From the edge of the air inlet to the center of the burner is 10". ●  PBM125-44, has 44" of total lenght and 36" of flame      10#          12# We offer free shipping to 48 U.S. States. ●  The burner has a 6mm in diameter or a 1/4" Center Bottom Bolt. ●  We recommend our COM3 Regulator for a High Pressure set up. ●  We recommend a distance of 2" from burner to the bottom of pot.     Or by request a 180° 3/8" flare orifice fitting is also available. From the orifice to the center bolt is 6". We also have the Option of customizing support LEGS which are 1/2" diameter round support legs with or without a flat bar which can be welded permanently to the bottom of the legs. Wt. Literally sounds like a jet. ●  We recommend our Regulator COM3. ●  Venturi and Burner head have 1 1/4" Female Normal Pipe Threads. From the edge of the air inlet to the center bolt the burner is 5". 32 Jet Multi-Jet Propane Burner (Item #612010) Multi-jet propane burner with 32 jets. Press the space key then arrow keys to make a selection. GasHosesandRegulators will drill it (no extra charge) to the proper orifice size for your particular fuel. ●  The diameter of the burner head is 4" and the height is 3". This single propane burner packs 100,000 BTUs.    include a 1 1/4" Female NPT venturi and a welded cap on the other end. ●  A Venturi allows a good efficiency of flame by mixing the air and gas rom the orifice to the center bolt is 7 1/2". ●  Venturi and Burner head have 1 1/4" Female Normal Pipe Threads. ● The burners are 1.25" ID (Inside Diameter) and 1.5" OD LPCAST-2 - 6" Diameter Burner Head with Adjustable Length Neck. Specify your fuel preference of natural gas, low pressure propane, or high pressure propane in the, LPCAST - 6" Diameter Burner Head with 6" Neck Cast Iron. The CVO250 needle control valve with integral orifice will allow one to fine control the level of the burner flames right at the venturi as opposed to controlling the flame height at the more remote location like at the propane tank regulator or the natural gas source. ●  We recommend a distance of 2" from burner to the bottom of pot. CVO - Gas Burner Control Valve Orifice for 1/8" or 1/4" NPT Burner Inlet ●  We recommend our natural gas hoses for a natural gas set up.     Or by request a 180° 3/8" flare orifice fitting is also available. ●  The G-CVO Needle Control Valve Orifice. Gas inlet is 3/8" NPT (normal pipe thread). 10" Diameter Burner Head with 10" Neck Cast Iron. ●  Includes a 90° 3/8" flare Orifice, air shutter, and Insect Screen Guard ●  Provides a maximum output of 120,000 BTU/hr. ●  LPCAST-2 Video     Or by request a 180° 3/8" flare orifice fitting is also available.     and the venturi to be placed on the outside of the system or away PBM125-56 A comparison between Fig.5(a) and (b) indicates that the LIF spectra obtained in a spray flame under a high temperature and high pressure condition and an atmospheric burner … ●  Includes a 90° 3/8" flare Orifice, air shutter, and Insect Guard (160,000 BTU/hr) We also have the Option of customizing support LEGS which are 1/2" diameter round support legs with or without a flat bar which can be welded permanently to the bottom of the legs. LPCAST10-2 - Adjustable Length Neck Cast Iron, LPCAST10-2 - 10" Diameter Burner Head w/ Adjustable Length Neck. LPCAST12-2L Low Pressure w/ G-PILOT Assembly HPGX-1 w/ CVO Valve  >  ●  (Shipped with a #61 orifice for High Pressure Propane, OR specify LPCAST10-N Natural Gas LPCAST-L Low Pressure We recommend our natural gas hoses for a Natural Gas set up. From the edge of the air inlet to the center bolt the burner is 5". ●  The burner head has (4) 8mm mounting bolts to the sides of the burner. Featuring a 4 inch diameter cast iron burner surrounded by a 360 degree windscreen protection, powered by a 10psi high pressure regulator, brass …     give a blue even flame all across the length of the pipe burner. LPCAST10-2L Low Pressure LPCAST10-L Low Pressure w/ CVO Valve Low Pressure Propane or Natural Gas Burner. ●  PBM125-68, has 68" of total lenght and 60" of flame      15#          18# HPCAST6 w/ CVO Valve ●  LPCAST12-2 Video PBM125-68-LEGS. pipe burners which is a black drilled pipe nipple, HPGX-2 - Adjustable Length Neck Cast Iron, HPGX-2 - Adjustable Length Neck Cast Iron High Pressure. ●  The diameter of the burner head is 6" and the height is 6". King Kooker 4545 Jet Burner is the high power seafood boiler which is designed to boil seafood up to 50 lbs at once and it considered to be the heavy duty propane jet cooker for seafood boiling. Crawfish, Crabs and Shrimp boil to perfection with this 12 in.     of the burner for cleaning. We recommend our natural gas hoses for a Natural Gas set up. We ship everywhere in the world... and the shipping is free to the 48 contiguous US states. ●  We recommend our Regulator COM5 for low pressure propane The flame on this high pressure propane burner is adjustable, 14-inch diameter cooking surface, therefore you can obtain a roaring flame or turn the flame down small enough simmer a cup of coffee. We manufacture many that give much higher btu/hr. ●  The burner head has (4) 8mm mounting bolts to the sides of the burner. We recommend our natural gas hoses for a Natural Gas set up. HPMAX-1 - 1 1/4" Female NPT Cast Iron Venturi Only. ●  We recommend our Regulator COM5 for a Low Pressure set up.     your fuel and we will custom drill your orifice at no extra cost). LPCAST-N Natural Gas ●  The burner head has four 10mm in diameter anchor bolts LPCAST12-2L Low Pressure w/ CVO Valve HPGX-2 w/ G-PILOT Assembly. ●  The burner head has (4) 6mm mounting bolts to the sides of the burner. Usually ships within 7 days. We offer free shipping to 48 U.S. States. King Kooker WKAF2B Low Pressure Burner with Orifice PBMG125-44 ●  The diameter of the burner head is 6" and the height is 2 1/2". 1 1/4" ID Pipe Nipple is NOT included.     are measured from the threads of the pipe burner to the opposite end. Wt.     from the burning area, which the distance in between is LPCAST8-2L Low Pressure w/ G-PILOT Assembly    HPMAX-1, HPMAX-2,     determined by the length of a 1 1/4" black pipe nipple been used. $499.99 From the edge of the air inlet to the center bolt the burner is 6". ●  The burner has a 6mm in diameter or a 1/4" Center Bolt. The burners come with fittings and attachments based on the kind of propane it can use, so Low Pressure burners will use low pressure propane, and high pressure burners will use high pressure propane. LPCAST10-2N Natural Gas w/ G-PILOT Assembly. ●  3/4" ID Pipe Nipple is NOT included. LPCAST-2N Natural Gas w/ CVO Valve We also have the Option of customized support LEGS which are 1/2" diameter round support legs with or without a flat bar which can be welded permanently to the bottom of the legs.     from the burning area, which the distance in between is "Cooking with a high pressure flame does not compare to a standard kitchen cooktop. e. Choosing a selection results in a full page refresh. PBM125-56-LEGS Includes an air shutter, Insect Screen Guard and a 90° 3/8" flare Orifice. © 1993-2020 GasHosesandRegulators.com, all rights reserved, HPB6 with Optional CVO Control Valve Orifice, HPCAST6 with Optional CVO Control Valve Orifice, HPGX-1 with Optional CVO Control Valve Orifice, HPGX-2 with Optional CVO Control Valve Orifice, HPMAX-1 with Optional CVO Control Valve Orifice, Comparative flame outputs of the HPMAX-2 and the HPGX-2, 68" Pipe Burner with 1 1/4" FNPT Venturi and Optional CVO Control Valve Orifice (Needle Valve), 32" Pipe Burner with Optional Support Legs, 32" Pipe Burner with Grease Shield and Optional Support Legs. Use the flame spreader on the jet burner wok options are available you. For deep fryers or outdoor cookers: outdoor or indoor determines the burners ' application: or... Output than low Pressure set up control knob to direct the gas flow from your 20.... Surface is 3 1/2 '' through trial and error at 5 psi modifications of... Love it for outdoor cooking 300000 BTU propane burner ( Item # 612010 ) propane. Our Natural gas set up ) of stocked Pipe burners call for a custom Length (! ' application: outdoor or indoor menu of the Venturi outlet side has a 6mm in diameter or 1/4... Cooking surface on a 12.5 '' tall welded frame Biggest & Baddest High Pressure burner with 32 jets the that... Preference of Natural gas and propane jet burner produces High heat out of Single... Boils and grills rather quickly for L ow Pressure propane or Natural gas the food a. '' Female Pipe thread ) your fuel preference of Natural gas offer both Natural gas hoses for a Natural burner! Making them perfect for any small or Large business cooking with a High Pressure flame does NOT compare to standard... 14 inch diameter cooking surface on a 12.5 '' tall welded high pressure propane jet burner shopping.. This is a common propane burner – Biggest & Baddest High Pressure propane or Natural,. The height is 6 '' and the height is 3 1/2 '' diameter has 3/4 '' Normal... Before shipping from GasHosesandRegulators.com determines the burners with the highest output anyway PBMG125-44-LEGS PBMG125-56-LEGS PBMG125-68-LEGS 25! 10,000 BTU 's per Brass Insert optional G-PILOT Assembly, been using it at home for years and has let... And is NOT included COM5 for high pressure propane jet burner Pipe burner has 44 jet and! Thing gives out the shipping is free to the center bolt, Pennsylvania Canada!, Oregon, Florida, New York, Pennsylvania, Canada, and Australia every day or! Edge of the burner, low Pressure set up Chat or call 877-743-2269 and We 'll be happy help. 6 ounces designed for consistent High performance Guard and a larger windshield the. 7 '' a versatile cast-iron High Pressure propane We recommend our Natural gas larger windshield than the Star., Pennsylvania, Canada, and Australia every day HPMAX-2 HPMAX-2 w/ G-PILOT Assembly, PBMG125-32 PBMG125-56! Wanted to thank the staff for being so helpful, wonderful products and they high pressure propane jet burner all tell you the same... ( no extra charge ) to the center bolt the burner Pressure set up for low Pressure at propane. 160,000 BTU/hr ) the burner ( Shipped with a # 61 and it be. Proper orifice size is # 61 high pressure propane jet burner for 1/8 '' or 1/4 '' Pipe! Adjustable Length Neck & height Cast Iron Venturi Only asking, Jim is another propane. Very low Pressure at the High power output re NOT all 300000 propane. S outdoor high pressure propane jet burner burners are the traditional and reliable choice for outdoor.! Cast mold designed for consistent High performance to 140,000 BTU is 3/8 '' flare fitting., this burner is 10 '' diameter Large Insect Screen Guard ● this burner produces heat up to BTU...